Ebode IP Vision 58, User Manual, Page: 12 / 77

Manual version 1 – March 2012 12 IP Vision 58
2. IP Cameras have been installed within LAN. All the IP Cameras will be listed and the total number is
displayed in the result field as shown in Figure 1.9
3. The IP Cameras installed within LAN do not share the same subnet with the monitoring PC. A prompt as
shown in result field (prompt:
Subnet doesn’t match, double click to change !). Click the left mouse button to
choose the prompt and click the right mouse, choose Network Configuration to set the static IP address of
the Camera to the same subnet as LAN. (Figure 2.3)
NOTE : If it shows” Subnet doesn’t match, double click to change !”, you can also choose ” Obtain IP from DHCP
Server ” to get a dynamic IP. (Figure 2.2) If the camera still doesn`t show in the IP Camera Tool please use the
Reset button on the bottom of the camera and hold it for 15 seconds with the power on. (Figure 1.3)
Please be sure your computer is on the same network as the camera
!
2.1.1 Six Options
Choose the IP Camera and Click the right mouse button on that camera, there are six options: (Figure 2.0).
Basic Properties , Network Configuration , Upgrade Firmware , Refresh Camera List , Flush Arp Buffer , About IP
Camera Tool .
Figure2.0
2.1.1 .1 Basic Properties
There are some device information in the Basic Properties, such as Device ID, System Firmware Version, Web
UI Version.
（
Figure 2.1
）
The Device ID just is the camera’s MAC ID, which should be the same as showed on the sticker at the bottom
of camera. Every camera has its unique MAC ID. So if there are many IP address showed in the list, check the
MAC ID, you can ensure which camera is it.
Sometimes, if there is no IP address showed on the IP Camera tool, maybe it’s blocked by firewall, then add
the MAC ID to the router, and give it a fixed IP or add the MAC ID as a trusted site. There are two MAC
Address, one is Device MAC ID, the other is WIFI MAC ID.
WIFI MAC ID , you can find it from the sticker at the bottom of the camera, if this sticker lost, you can login
your WIFI router, check the host status, which will show all the WIFI device connect to this router, you can also
find the IPCAM’s WIFI MAC ID there.