Chapter 7
29
4 points, mode 2
a. The
mark shows in the middle of the length of the screen.
b. Follow the instruction in green to touch the center of Cross Mark.
c. When the instruction turns into yellow, releasing the tapping from the
screen.
d. Follow the instruction in green to touch the center of Cross Mark.
e. Repeat Step 2 – Step4 to finish the calibration procedure.
3. When the calibration procedure is completed, the message shows:
To save the new calibration, click
Yes
, to restore the old calibration, click
No
.
How to Use Event Selector
1. On the desktop of Windows, click
icon.
2.
icon change to
.
3. Now the tapping is simulating right mouse button clicking.
4. After one tap on the screen,
icon change to
.
5. The tapping resumes to left mouse button clicking.
