ebmpapst Denmark ApS, Vallensbaekvej 21, 2605 Broendby
+45 4363 1111
2019.08.01 – page 3
Read these operating instructions carefully before starting work on the device. Observe the following warnings to prevent
malfunctions or danger to persons.
These operating instructions are to be regarded as part of the device. The device is only to be sold or passed on
together with the operating instructions.
-//-
1. SAFETY REGULATIONS AND INFORMATION
1.1 Hazard levels for warrnings
These operating instructions use the following hazard levels to indicate potentially hazardous situations
and important safety regulations:
1.
DANGER
Indicates an imminently hazardous situation which will result in death or serious injury if the specified
actions are not taken. Compliance with the instructions is imperative
.
2.
WARNING
Indicates a potentially hazardous situation which can result in death or serious injury if the specified
actions are not taken. Exercise extreme caution while working.
3.
CAUTION
Indicates a potentially hazardous situation which can result in minor or moderate injury or damage to
property if the specified actions are not taken.
4.
NOTE
A potentially harmful situation can occur and, if not avoided, can lead to property damage.
1.2 Staff qualifications
5.
The device may only be transported, unpacked, installed, operated, maintained and otherwise used
by suitably qualified, trained and authorized technical staff.
Only authorized specialists are permitted to install the device, to carry out a test run and to perform
work on the electrical installation.
1.3 Basic safety rules
6.
The safety hazards associated with the device must be assessed again following installation in the
final product.
7.
Note the following when working on the device:
Do not perform any modifications, additions or conversions on the device without the approval of ebm-
papst.
1.4 Voltage
8.
Check the device's electrical equipment at regular intervals, including the potential equalization
connection, cf. EN60204-1.
Replace loose connections and defective cables immediately.
9.
DANGER
Electrically charged device.
Risk of electric shock.
When working on an electrically charged device, stand on a rubber mat.