17.10.2017
Page 58 of 81
8.2.19 Migration of Parental Control to eBlockerOS 1.0
If you have already used Parental Control in eBlockerOS 1.0, you will notice that users have been
created for each protection profile in use. These users have automatically been assigned to the
appropriate devices.
This was necessary because the profiles are no longer directly assigned to the devices.
Nothing should have changed in your home network, due to the upgrade.
In order to make the best of Parental Control, you should rename or replace the automatically created
users and add more, if necessary.
8.3 Devices
The „Device“ function shows a list of all network devices that are identified by your eBlocker in your
home network.
The devices are initially identified by their IP address and - as far as the eBlocker can determine - by
the manufacturer. By clicking on the IP address, you open further details about the device and can
adjust the settings.
Your router and eBlocker have their own grey icon. You can assign an optional name to both devices,
but you cannot make any other settings.
Devices with an orange icon are online are currently active on your network.
Devices with a grey icon are currently not active in your network.
