EBL EBL-C9036W, User Manual

Page: 9 / 51

WARNINGS
TO AVOID PERSONAL INJURY AND PROPERTY
DAMAGE FROM, BUT NOT LIMITED TO, THE RISK
OF ELECTRIC SHOCK OR FIRE:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
07
DO NOT disassemble and reassemble the charger, or it may cause
short-circuit.
DO NOT charge batteries whose cover are damaged, or it may
cause short circuit and fire hazard.
DO NOT charge non-rechargeable batteries. It might cause battery
leakage, battery explosion, personal injuries, etc.
DO NOT put anything on the charger while charging batteries, it
will accumulate heat to cause fire hazard.
Indoor use only, keep it away from direct sunlight and moist/high-
temperature environment.
Children should not use this charger without any adult’s supervision.
The LCD will be light after power-on, showing“CHG” and the power
status when battery is placed correctly. The power status is
displayed solid only when the battery is fully charged.
When non-rechargeable batteries were put in, or there’s short-circuit
situation, the charger will show “ERROR”
If the LCD display doesn’t show “CHG” when you put batteries in,
please check if the battery is 0 Volt. Make sure the +/- pole of
battery matches the +/- pole of charger.
The absolute 0 volt battery can not be charged in this charger.
EBL-C9036W is ONLY designed for AA/AAA/C/D Ni-MH Ni-CD
and 9V Ni-MH Ni-CD Li-ion rechargeable batteries. Please DO
NOT put any other types of batteries in this charger, especially
alkaline batteries.
New battery will reach the best performance after using 2-3 times.
Battery power will lose because of long time storage. Please charge
the battery fully if it is not used for long time.
It's normal that the battery becomes hot while charging. The
temperature will cool down to normal later, please feel free to use it.