10
11
EN
TOR
4.
Align the base to the unit body, and then tighten the screws connecting the base to the device.
1.
Place the device on a flat and stable surface.
2.
Water filling: open the water inlet door, then fill the water.
Attention:
a.
Pay attention to the water level indicator when adding water.
b.
The water level indicator should not exceed the „MAX” scale at any time, and during evaporative
cooling the total water level in the reservoir should not be below the „MIN” scale.
Fig.3
Fig. 2
PRODUCT USEAGE
body
Fixing screw
basement
FILLING THE WATER TANK
