RON
EN
9
www.eberg.eu
•
Use this fan only as described in this manual. Any other use than recommended by the
manufacturer may result in fire, electric shock or injury.
•
Make sure that the mains supply matches the voltage specified on the fan nameplate (220-
240V ~ 50Hz).
•
The device must not be placed very close to a power outlet. The rated current of the socket
should exceed 10A.
•
This appliance is not intended for use by children under 8 years of age and persons with
reduced physical, sensory or mental capacity, unless they are supervised or have been
instructed in the use of the appliance by a person responsible for their safety.
•
Children should not play with the device.
•
Cleaning and user maintenance shall not be made by children without supervision.
•
Disconnect the mains power supply when the device is not in use or when cleaning it.
•
The air inlet and outlet must not be obstructed.
•
Make sure that all adjacent objects are at least 1 meter from the appliance (e.g. walls,
furniture, curtains, curtains).
•
Avoid using the fan in dusty environments or in the presence of flammable vapors (e.g. in
workshops or garages).
•
Do not put anything on top of the device and only use a damp cloth with natural detergents
for cleaning. Do not rinse the device with water.
•
Use the equipment in a well-ventilated area.
•
Do not put your fingers or any objects into the air inlet / outlet as this may result in electric
shock or fire and may damage the device.
•
To avoid the risk of fire, do not block the grilles or manipulate them in any way while the fan
is running.
•
Do not use the device if the cord or plug are damaged. If the power cord is damaged, it
should be replaced by the manufacturer, dealer or a qualified person in order to avoid a
hazard.
•
Do not use the appliance if it has been overturned and damaged as a result or if it has been
damaged in any way. An overturned or damaged fan must be disconnected from the power
supply. Contact the service center to check or repair the device.
•
Do not knock or shake the device. This can damage the motor or rotor
•
The most common cause of overheating is dust build-up in the device. Remove dust by
unplugging the appliance and by cleaning the air outlets and grilles with a vacuum cleaner.
•
Do not use abrasive materials to clean this device. Clean the device with a damp (not wet)
cloth.
•
Always remove the plug from the socket before cleaning .
•
Do not pull on the power cord when disconnecting the fan.
•
Do not put any objects on the cord and do not bend it.
•
The use of extension cords is not recommended as they can overheat and there is a risk of
fire. Do not use an extension cord to operate multiple devices.
•
Do not immerse the cord, plug or any other part of the appliance in water or other liquids.
•
Do not touch the plug with wet hands. Do not operate the device with wet hands.
•
Do not use the device in an atmosphere with high humidity (e.g. bathroom, laundry room).
Before using it for the first time, read this manual carefully
and keep it for future reference.
1. SAFETY NOTES
