RG11
EN
18
www.eberg.eu
4.2. Register and log in to the application.
4.3. Connect the device to the power supply and make sure that it is within the range of the network.
4.4. Adding the device in manual mode.
4.4.1. To add a new device, press
the“+” button in the top right
corner of the screen.
4.4.2. Make sure, that Wi-Fi,
Bluetooth and location are on.
4.4.3. Select the type of device
as “Heater (Wi-Fi)” within the
Small Home Appliance tab.
4.4.5. Your network, in which
the device will be used, must
operate in the 2.4GHz band.
Set the network and password.
4.4.6. The Wi-Fi indicator on the
control panel is blinking rapidly
when the device is in standby
mode. Confirm the flashing in
the application.
4.4.7. The process of searching
for a wireless device in the Wi-Fi
network will begin.
Decrease desired
temperature
Temperature
range 5-50ºC
