RG11
EN
15
www.eberg.eu
•
The heater will beep as it power on. The heater starts on standby mode.
•
To initiate heating, press the ON/OFF
button. When the heater is switched on the heating icon
.
•
You will see the ECO mode icon
. This means the device is in the ECO mode state.
MODE
To change heating mode, press the
MODE button to cycle through the modes: ECO mode
,
Comfort mode
and anti-frost mode
. And the heater will be in the mode selected.
Eco Mode
– In this mode the heater operate at 900W (230V, 50 Hz).
Comfort Mode
– When the heater is operating in comfort mode it is running at its full capacity.
Anti-frost Mode
– This mode is specifically designed to prevent frosting. When the ambient temperature
is below 5° the product will begin to operate. If the ambient temperature rises greater than 7° the product
will automatically cease heating.
TEMPERATURE
To set the temperature of any of the modes, you can use the
MINUS and
PLUS buttons to
adjust the temperature. Temperature range is from 5°C –50°C.
TIMER
To set the timer, press the
TIME button, each press increases the value by 1 hour. Timer range is 1 –
24 hours. The timer icon
on the screen will show that the timer has been set. The heater will turn off
automatically as long as the set timer elapsed.
CHILD LOCK
To set the child lock, press and hold the
button until the Keyboard lock icon
will
appear on the screen. Then the control panel will be locked out. To release, press and hold the
button.
