Eberg Q1, Instruction Manual, Page: 12 / 16

Q1 GB
11 www.eberg.eu
For example: Setting Monday 1st period working time 7:00 to 13:00
If open-window mode and weekly timer program simultaneously, if the appliance turn off in weekly time,
the appliance is not turned on. If it already turn on in weekly timer, the appliance working as the setting
temperature under open-window mode.
For example: when window open detection function on, the weekly working time already setting: it’s
Monday morning A.M 9:00--10:00 , desired temperature 28°C, the window open only working A.M 9:00-
-10:00 , the unit will cut off when temperature reduce to 23°C or more lower. Other time, the unit not
working, just in standby.
If main switch off or power cut off , it need reset the time
During open window mode, if the room temperature drops from about
5°C to 10°C in less than 10 minutes, the appliance will stop working and
enter into stand by mode. Press again to switch on the appliance.
Press to switch on the appliance, heating for a moment
until stability.
Press to active the open window mode (the light is on).
Press + or - to set the setting temperature for the open windows
function.
Press to disable the open window mode (the light is off).
The appliance will resume to previous working mode.
Press P to active the weekly program (the light P is on), or to disable it (the light P is off).
After the above setting are completed and P program is work, press DAY / EDIT TIME/ON and TIME/OFF to
check the setting time of each day and time period.
When the turn-on time is same as the turn-off time, the appliance is in stand by mode.
If the setting temperature is not set, the default setting temperature is 23°C. If room temperature higher
23°C, the appliance is not switch on.
The weekly program is erased when the switch is off.
1. Press P to enter into weekly program setting (the light P is on).
2. Press DAY to set the day of program activation (d1, d2,d7...),
3. Press EDIT to set the time period number (P1, P2,...P6),for each day, it can be set maximum 6 time
periods.
4. Press TIME/ON to set the turn-on time (00,01,02 ...,24). Cannot set to minutes.
5. Press TIME/OFF to set the turn-off time (00, 01, 02,..., 24) Cannot set to minutes.TIME/OFF can not be
less than TIME/ON.
6. Press + or - to set the setting temperature of this time period.
7. Press OK to confirm the setting.
8. Repeat steps 3 to 7 to set another time period number for the same day. Up to 6 programs are available
for each day of the week.
9. Repeat steps 2 to 8 to set the others days of the week.
SET OPEN WINDOW
Day EDIT Time/ON Time/OFF OK