Q1
GB
10
www.eberg.eu
The heater working on half power when the room temperature is between 0° and 2°C lower than the
setting temperature.
The heater switches off when the room temperature is higher than the setting temperature. the fan
working 30 seconds to make inside cool to protect component, then fan stop, the unit enter into standby.
The heater switches on again when the room temperature falls 2°C below the setting temperature.
by control panel and remote control
Press to set the appointment turn-on time in 1-12 hours (the light is on).
The display automatically decreases 1 hour for each hour passed. When the appointment power-on time
arrived, the product will automatically turns on. The default setting temperature is 23°C.
If not setting the setting temperature and weekly program, the unit will automatically turn-off after
continuous working 12hours and enter into stand-by.
For example to set appointment turn-on time to 8 hours
Press to switch on the appliance.
Press
SET
to display the hour.
Press
+
or
-
to set the current hour (00 to 23).
Press
SET
again to display the minute.
Press
+
or
-
to set the current minute (00 to 59).
Press
SET
again to display the day of week.
Press
+
or
-
to set the current day (
d1
= Monday,
d2
=Tuesday,
d3
=Wednesday,
d4
= Thursday,
d5
= Friday,
d6
= Saturday,
d7
= Sunday - Press
OK
to confirm the setting).
The current time must be set before any programming. Press to switch on the appliance.
Press to set the appointment turn-off time in 1-12 hours (the light is on)
When the appointment power-off time arrived, the product will automatically turns off. The default
setting temperature is 23°C
For example, Wednesday 9:30 , Setting temperature = 25°C :
To check the current time and setting temperature, press SET again.
If main switch off or power cut off , it need reset the time
TURN-ON IN STAND-BY MODE :
TURN-OFF IN RUNNING MODE
SET CURRENT TIME
SET WEEKLY PROGRAM
TIMER
WEEKLY TIME
SET
SET
SET
