FOGI
GB
12
www.eberg.eu
Abnormal Phenomenon
Causes
Solutions
Digital screen is off, without
wind or atomizing
Power cord is not properly fixed. Check the connection status of
power cord
Power button is not yet pushed.
Check if the power switch is
turned on
Touch button insensitive
Wet hand and button touching
too fast
Dry the wet hands
Do not press the button too
fast, and press the button every
1 second.
Objętość mgły jest mała, a
strumień wody rozpyla się po
włączeniu urządzenia.
There is incrustation on
transducer unit; or, it is a new
machine;
Clean atomizing piece with
swab; inject new water.
Or it has been stored for a long
time.
Change original water.
Mist is smelly
Unclean water inside water tank Open tank cap and keep the
tank open in shade for 12h, and
then clean it, and refill it with
water.
Waterless indicator light always
on
The water tank is not attached
correctly with the base.
Lift the tank again and install
the tank to machine body by
direction.
Leaking mist from nozzle cover
Nozzle cover not in place.
Re-place the nozzle cover in the
right direction.
Leaking between the tank and
base
Tank cape is not srewed on
tightly
Re-screw on the cape tightly.
There are cracks into the tank
Change a new water tank.
COMMON TROUBLE SHOOTING
ENVIRONMENTAL PROTECTION
According to the European Directive 2002/96 / EC, after the end of its life, the product
should not be disposed of as unsorted municipal waste. The device must be delivered
to appropriate collection points. Some chemicals contained in electrical / electronic
components of the device or batteries can be harmful to the environment and from the
human drow, and proper disposal avoids these negative consequences.
Consult local waste disposal units for information on available recycling and / or disposal
options. This obligation is marked with the symbol of the crossed out dustbin.
