EBARA Ego 2 slim, Installation And Operating Manual

Page: 21 / 118

21
1.3 PUMP MAINTENANCE, SPARE PARTS AND DECOMMISSIONING
Pumps are designed to operate without maintenance for several years. This product and its components must
be disposed of in an environmentally friendly manner. Use waste collection services, if this is not possible, contact
the nearest Pumps Service or authorized repairers.
2 SAFETY
These instructions should be studied carefully before installing or operating the pump. They are meant to help
you with installation, use and maintenance and to increase your safety. Installation should only be performed
with regards to local standards and directives. Only qualified personnel should maintain and service these
products. Failure in following these instructions can cause damage to the user or product and can void warranty.
Safety functions are only guaranteed if the pump is installed, used and maintained as described in this manual.
3 TEHNICAL SPECIFICATIONS
3.1 STANDARDS AND PROTECTIONS
Pumps are made in according to the following standards and protections:
Protection class: Insulation class: Motor protection:
IP44 180 (H) Thermal - built in
Installation specification
Pump type Nominal pressure Fitting length [mm]
Ego 2 (TC) slim 32-120
PN10
220
Ego 2 (TC) slim 40-40 220/250
Ego 2 (TC) slim 40-80 220/250
Ego 2 (TC) slim 40-120 220/250
Ego 2 (TC) slim 40-180 220/250
Ego 2 (TC) slim 50-40 280
Ego 2 (TC) slim 50-80 280
Ego 2 (TC) slim 50-120 280
Ego 2 (TC) slim 50-180 280
Ego 2 (TC) slim 65-40 340
Ego 2 (TC) slim 65-80 340
Ego 2 (TC) slim 65-120 340
Ego 2 (TC) slim 80-40 360
Ego 2 (TC) slim 80-80 360
Ego 2 (TC) slim 100-40 450