User Manual Mystère June 2001
eb
PRO
PRO
motion
, Cité Robinson10 2074 Marin, Switzerland
www.ebpromotion.ch
3
Tel +41(0)32 763 05 63 Fax +41 (0)32 763 05 64 e-mail: erich@ebpromotion
Front panel
1.
4 Level control knobs for microphone and line - inputs
.
Switches on the control-panel allow channel 1 and 2 as well as channel 3 and 4 to be
electronically linked. This allows a one-knob-control of two channels.
2.
2 Level control knobs for the outputs
Both output channels may be linked for one-knob-control.
3.
4 Control knobs for microphone preamp gain control
4.
„LEVEL“
Control of headphone level (left knob below the display)
5.
Monitoring switch
for Left, Right, Mono, Stereo or MS Monitoring over the headphone.
6.
„BATT“
Push-button for battery-level (Left hand side of the display)
Fully charged battery shows illuminated LED. Every diode less signifies a drop of tension
of 0,2V with 0 = 12V
7.
„ON“
On/Off status indication
8.
„REF“
Reference tone – switch with three positions
Left position (fix) =
continuous tone of 1 kHz
Right position (momentary) =
1 kHz tone as long as switch is maintained in position.
Middle position =
reference tone out
9.
OUT / RET
Switch for tape return to headset monitor
7
12
1
2
10
11
3
6
9
5
8
4
Precision tuning of the Reference tone:
Mystère allows you to adjust the
reference tone with the precision of 0,2 dB. As soon as the „REF“ switch is
activated, 2 LEDs illuminate on each channel. The left LED indicates at – 9, -12
or – 18 dB, depending on the chosen reference level. The right one shows the
deviation of the signal with a precision of 0,2 dB. Adjust the LED to the 0-
position on the display using the Master out buttons.
