8
Functions and Operations
RS 121, 123, 151, 153 Rear Input Panel Diagram
1.
Level (Gain) Control
Adjusts the level of the INPUT signal. Turning counterclockwise will reduce the output level and
turning clockwise will raise the overall output level of the speaker.
2.
XLR Input Connector
Balanced XLR input connector for analog input signal.
3.
XLR Thru (Output) Connector
Balanced XLR output connector to daisy-chain input signal to other speakers. This signal comes
directly from the input signal and is unaltered by speaker’s internal processing.
4.
Balanced TRS Connector
Balanced 1/4” TRS input connector for analog input signal.
5.
Line/Mic Switch
This switch controls the input sensitivity. For low-voltage signals, such as from a microphone, set the
switch to the MIC position. For high-voltage signals, such as from a mixing console, set the switch to
the LINE position.
NOTE:
Utilizing the MIC switch position with a high-voltage signal may cause damage to your speaker –
be sure to use the proper switch settings based on the incoming signal strength.
Summary of Contents for RS121
Page 1: ...RS Series User Manual...
Page 7: ...6 RS Subwoofers...
