11
5.
Crossover Button
This button is used to toggle between crossover frequencies – the two crossover frequency options
are 80Hz and 100Hz.
6.
Mode Button
This button is used to toggle between the speaker’s two pre-defined voicings – Normal and Depth.
Though normal mode is tuned for deep, robust bass, depth focuses on further boosting frequencies
on the lower end of its frequency range.
7.
Status LED Indicator
The status indicator will remain lit if the speaker is in functioning condition. If the light blinks, it
indicates that the speaker has entered temperature protection mode and must be cooled down and
power-cycled before it will function normally.
8.
Signal LED Indicator
The status indicator will turn green when an input signal is detected. NOTE: Low-voltage signals may
not be able strong enough to trigger the LED indicator, but may still be heard from the speaker – this
is perfectly fine.
9.
Limit LED Indicator
The limit indicator will turn red when the output has reached its maximum level. If the LED blinks
occasionally, EAW DynO™ will optimize the output and continue to provide clear output at its
maximum volume. If the LED blinks frequently or is lit continuously, reduce the level control (1) to
prevent output distortion.
Summary of Contents for RS121
Page 1: ...RS Series User Manual...
Page 7: ...6 RS Subwoofers...
