Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
8
MKC Series & MKD526
Bracket Instructions
6. Maintenance of an MKC Series or MKD526 U-Bracket installation
a.
WARNING: Not following Maintenance instructions could result in equipment damage,
serious injury or death.
b. Maintenance should only be performed by an experienced technician.
c. As with any professional loudspeaker system, routine maintenance must be conducted in
order to ensure the longevity and safe, consistent performance.
d. Inspect the bracket for corrosion and other damage. Brackets with visible damage
should be replaced and discarded.
e. Inspect hardware securing the bracket to the mounting surface for corrosion or
looseness. Tighten loose hardware and consider installing hardware locking methods.
Replace and discard corroded hardware.
f. Inspect hardware mounting the loudspeaker to the bracket for corrosion or looseness.
Tighten loose hardware. Replace and discard corroded hardware.
g. For weather protected applications (using WP Series Loudspeakers), inspect hardware
sealants for cracking or gaps in sealant. Replace damaged sealant with user-supplied,
waterproof, non-hardening, non-locking sealant per the sealant’s instructions. Failure to do
so could result in water ingress and damage to the loudspeaker.
h. Clean brackets and loudspeakers with a dry cloth.
7. Dismantling the MKC Series or MKD526 bracket installation
a.
WARNING HEAVY LIFTING – Fully support the weight of the loudspeaker. Using a
allen wrench, remove the screws at the mounting and angle lock points. Carefully lower
the loudspeaker to the ground.
b. Support the weight of the bracket. Remove the mounting hardware securing the bracket
to the mounting surface. Carefully lower the bracket to the ground.
c. Discard all damaged components.
EU Declaration of Conformity
EAW North America Inc hereby declares that this device is in compliance with Directive
2006/42/EC
A copy of this EU Declaration of Conformity is available at
