EAW DX1208, Help File

Page: 45 / 64

[High] When [High], the Logic Output level is +4.8V
(unloaded).
•
Function Function defines which DX1208 parameter(s) the Logic Output
controls.
[None] Disables the logic output. Does the same thing as
unchecking the
Enable setting.
[System Normal] Indicates that the unit is operating normally.
This condition is the inverse of the [System
Failure] state.
[System Failure] Indicates that some internal condition has
caused the unit to reset itself. This condition remains
TRUE after the reset until the unit is power cycled.
This state is the inverse of the [System Normal] state.
[Comm Any] This output represents the logical OR of all five of
the comm logic outputs listed below: [Comm Logic],
[Comm Remotes], [Comm Ethernet], [Comm UART],
and [Comm USB]. It is identical to the green COMM
led on the unit’s front panel.
[Comm Logic] This output is active whenever a high-low or low-
high transition is detected on any of the 6 logic
inputs. This is true regardless of whether the Logic
Inputis
Enabled , and regardless of which Function
and Active states are defined.
[Comm Remote] This output is active whenever communication
is received from an Enabled remote control, and
regardless of which Functions and Actions are
assigned to the remote(s).
[Comm Ethernet] Active when communication occurs between
DX Navigator and the DX1208 hardware over the
Ethernet port.
[Comm UART] Active when communication occurs between DX
Navigator and the DX1208 hardware over the RS-
232 port.
[Comm USB] Active when communication occurs between DX
Navigator and the DX1208 hardware over the USB
port.
NOTE: Since the [Comm Ethernet], [Comm UART],
and [Comm USB] functions each indicate active
communication connections with DX Navigator over
their respective ports, activity on more than one of
these
Functions indicates that multiple instances of
DX Navigator are connected to the unit.
[DX Link Lock] Active when a synchronous DX Link signal is
present on the DX Link Rx jack. This output is
identical to the
DX Link Locked indicator in the UI
Settings tab, and the DX Link Active led on the front
panel of the unit.
45