Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
23
AC6
User Manual
4. Installation of cabinet bracket to the AC6 unit
a. Using the desired cabinet orientation (input
on bottom, or top), and desired pan direction
(left or right) identify which side of the cabinet
to mount the bracket.
b. The bracket must be mounted on the side in
which the pan is required. The bracket will not
pan the opposite direction. For symmetrical
L/R setups, the bracket will mount in mirror
fashion.
c. Locate the flytrack studs attached to the
bracket inside the flytrack on the back of the
cabinet. The two locating brackets on the
outside of the bracket should sit inside the
flytrack ridges.
Detail: Flytrack studs and locating brackets
d. Using 10mm wrench or hex driver,
tighten the lock nuts on the flytrack studs
to secure the bracket to the cabinet. Do not
overtighten. (see image to left)
e. The pan locking arm can be moved to the
opposite side of the bracket if needed for
improved tool access.
