Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
16
AC6
User Manual
About
:
The About screen provides information
about the loudspeaker’s current input
source, model number, firmware and
network address details.
Home Screen
After 5 seconds have passed with no turn or
press of the DSP Navigation / Edit Wheel the
Home Screen is displayed showing primary
settings, levels and statuses at a glance.
The Control IP is the IP address assigned to the
modules DSP.
Three indicators are listed below the Control
IP. A & B represent the two Dante inputs.
►
GRAY
: Not plugged in, or no signal on
the cable (network is not active)
►
RED
: Active network connection with
speed
►
(ie two speakers connected
together but not to anything else).
►
Normally, Ethernet Green LED ON,
Yellow LED OFF
►
AMBER
: Active network connection,
speed is less than 1Gbps
►
GREEN
: Active network connection
with 1Gbps network speed
Input will indicate whether a Dante or Analog
signal is being detected. This can be toggled
in the Resolution or changed by assigning/
unassigning in Dante Controller.
The Dante IP is both the primary and
secondary IP address assigned to the Dante
Card. Under the Dante IP, is the name that
has been configured for the module in Dante
Controller.
Network Topologies
Networks, by definition, offer flexibility to the
user; many approaches can work. Users can
create both redundant and non-redundant
networks for control and audio signal. The
cabling, equipment and setup requirements
vary for any given design. The two examples
below represent starting points from which
individual users would build their own specific
solutions.
