36
12
Landing Failure
1) Push and hold the throttle stick of the remote controller down, and switch to manual mode at
the same time to stop the motors.
2) Upload logs and contact the customer service. Move the drone to a flat place to power on
to test and continue operations if it works.
13
Exceeding
Maximum Altitude
Settings
1) Switch to manual mode or use fine-tuning to adjust the operating height, then switch back
to auto mode.
2) Before switching back to auto mode, make sure the height displayed by the APP is basically
the same as the actual operating height.
14
Failure to Locate
Safe
Zones
1) Check whether there are obstacles between the take-off point and the operation area, if not,
you may continue operations.
2) If there are obstacles between the take-off point and the field, it is strongly recommended
that the user reselects the take-off spot.
15
Fine Tuning
1) Fine tune if the drone and obstacles are clearly visible.
2) If you can't see the drone and obstacles, nor the operation environment of the drone, tap Go
Home.
3) If you can't return, make a forced landing.
4) After landing, check whether all sensors are clean, notify the backend to process the plot,
and upload the flight log.
16
Forced Landing
1) Make sure it is safe to land the drone, then follow the voice instructions to operate.
2) If there are obstacles or water below, use the APP fine-tuning function to guide the plane to
the nearest safe zone for forced landing.
3) Skilled pilots can switch to manual and fly to the nearest safe landing. Note that if it is a forced
landing due to insufficient power, you must land as soon as possible, otherwise the drone will
fall when the power is exhausted.
17
Request for
Exhausting
1) Check pipes for leaks.
2) Check whether the water pump is working properly.
3) If the problem persists, please contact customer service, and upload the relevant data.
18
Battery Failure
1) Use another fully charged smart battery to power on the drone again. Before inserting the
battery, make sure that there are no grass clippings, soil, stones, or liquid residues in the
drone's battery socket. Make sure
the
battery is firmly inserted. If it works, you may continue
operation.
2) If the problem persists, please contact customer service, and upload the relevant data.
19
Other Warning
Prompt
1) Process according to the prompt, and then restart the system.
2) If the problem persists, please contact customer service, and upload the relevant data
