9
Remote controller top interface
Remote controller bottom interface
Remote controller operation
Turning on and off
1. When the remote controller is powered off, press the power button to check the battery level of the
internal battery. Recharge before use if the battery level is low.
2. When the remote controller is powered off, press the power button to lighten the battery level LED,
then press and hold to power on the remote controller. Wait till all LEDs to light up in sequence.
3. When the remote controller is powered on, press and hold the power button for about 2 seconds
until the shutdown button pops up. Tap it to turn off the remote controller.
Screenshot: when the remote controller is powered on, press and hold the power button for about 2
seconds until the screenshot button pops up. Tap it to screenshot.
Standby: when the remote controller is turned on, press the power button to switch to the
energy-saving mode.
It takes about 90 seconds to power on the remote controller for the first time. And it takes about 30
to 35 seconds to change battery during operation (with backup battery).
Charging
Charge the battery with the AC power adapter when the remote controller is powered off.
1. Use Type-C fast charging cable to connect the remote controller and adaptor.
2.
The Status LED turns solid red when charging.
3. The Status LED turns solid green when fully charged.
The remote controller cannot be charged with the 5V adaptor, please use the original charger.
Make sure the remote controller is powered off when charging, otherwise, it will be overheating.
