EauVation Acqua 80, Service Instructions Manual

Page: 11 / 30

Commissioning
9
5 Commissioning
IMPORTANT The hygiene filter may be installed only after the hygiene maintenance (

6) to avoid de-
stroying it.
Caution
Damage as the result of leaking water
Adhere to the following sequential order during commissioning:

Fill the water bath of the ice-bank (

5.2)

Install the dummy plug (

5.3)
5.1 Prerequisites

Gas and water connection in accordance with chapter 4.

Electrical connection in accordance with chapter 4.

The water stop cock is closed.

The valve on the carbonic acid bottle is closed.

The shut-off valve after the gas pressure reducer is closed.

The water dispenser is switched off.
5.2 Fill the ice-bank water bath

Open the water stop cock.

Fill the water bath to a level between MIN and MAX.

Use a cable tie to fix the level indicator hose in place.

Close the water stop cock.

Insert the water connection hose into the “IN H
2
O” connection.
Before inserting the hose, spray the end of the hose with
EAUVATION N° 2.
5.3 Installing the dummy plug

Pull out the mains plug.

Unscrew the upper cover plate and remove it.

Remove the bracket (1).

Spray the inside of the filter head (3) with EAUVATION N° 2.

Spray the dummy plug (4) with EAUVATION N° 2 and screw
into the filter head (3).

Close the lever at the filter head (turn to the right).

Install the bracket (1).