THERMOSTAT
The thermostat
2
is set at maximum for
the ice-bank.
If you wish to avoid the formation of ice
in the ice-bank, turn the screw on the
thermostat a quarter of a turn
anticlockwise
18
INSTALLATION
CONNECTION TO ELECTRICITY
1.
Connection to the electricity
supply must conform to the local
regulations.
The product must, by
law, be earthed.
2.
Connect the power supply cable
to the electric socket.
3.
Switch on the water cooler by
pressing the “I” key on the mains
switch. At this point the supply
keyboard, the motor-agitator (in
the ice-bank), the compressor and
the fan will all start up. On the
FIZZ models the pump for the
carbonator will also start up.
4.
Open the Sparkling Water tap
P1
to release the air present in the
circuit.
5.
After 2 or 3 minutes the pump for
the sparkling water will stop.
