9 Technical data
9.8 Applied standards and directives
Touch display XV-102
10/2020 MN04802004Z-EN
Eaton.com
75
9.8
Applied standards and directives
Tab. 40 Applied standards and directives
Fig.. 43 Ethernet cable, double loop through ferrite
Property
XV-102
EMC (relevant for CE)
IEC/EN 61000-6-2
Interference immunity for industrial environments
IEC/EN 61000-6-4
Emitted interference for industrial environments
Devices meeting this standard may not be used in
residential areas
IEC/EN 61000-6-3
5.7" devices only without cable at the USB
host and USB device interfaces
Does not apply to devices with a Smart-
Wire-DT master interface
Interference immunity for residential areas, commer-
cial and light industrial areas as well as small busi-
nesses
Ethernet cable with double loop through ferrite.
See Fig. 40 as per table
EMC (for marine approvals)
2004/30/EU
Electromagnetic Compatibility (EMC) Directive
Explosion protection (relevant for CE)
ATEX 94/9/EG: Zone 22, Category 3D (II 3D Ex tc IIIC T70°C IP6x):
IEC/EN 60079-0
Explosive atmospheres: Equipment - General
requirements
IEC/EN 60079-31
Explosive atmospheres: Equipment dust ignition
protection by enclosure “t”
safety
IEC/EN 60950
UL 60950 (only 3.5" devices)
Safety of Information Technology Equipment
UL 508
Industrial Control Equipment
(technical conditions for acceptance by UL
Product standards
EN 50178
Electronic equipment for use in power installations
IEC/EN 61131-2
Programmable logic controllers: Equipment require-
ments and tests
