7 Maintenance and service
7.2 Maintenance
54
MICRO PANEL XV-152
12/2011 MN04802006Z-EN
www.eaton.com
7.2
Maintenance
Devices with resistive touch are maintenance-free. However, the following work may be necessary:
Cleaning of the resistive touch if contaminated.
Recalibration of the resistive touch if it does not respond correctly to touch operation.
7.2.1
Cleaning the resistive touch
1
Clean the resistive touch carefully with a clean, soft, damp cloth.
With stubborn contamination, spray a little cleaning agent onto the damp cloth first.
7.2.2
Recalibrating a resistive touch
The resistive touch is already calibrated when delivered. However, it must be recalibrated if it does not
respond correctly to touch operation. Touch calibration, see Document «MN05010007Z-EN System
Description Windows CE».
7.2.3
Battery
The integrated battery cannot be exchanged. Lifespan, see Chapter 9.4 System,
63.
CAUTION
Cleaning the device
Damage to the device due to the use of pointed or sharp objects or by liquids.
Do not use any pointed or sharp objects (e.g. knife) for cleaning.
Do not use any aggressive or abrasive cleaning agent or solvent.
Avoid any liquid entering the device (risk of short-circuit).
