6 Operation
6.4 Inserting and removing an SD card
MICRO PANEL XV-152
12/2011 MN04802006Z-EN
www.eaton.com
51
6.4
Inserting and removing an SD card
Inserting the SD card
1
Push the SD card into the SD slot (A) until it snaps into position.
Removing the SD card
1
Push the SD card in the SD slot (A) all the way in.
This releases the lock mechanism and the SD card comes out of the SD slot a little.
2
Remove the SD card from the SD slot.
Fig. 30 SD slot (A)
CAUTION
Data loss
During a write operation, the SD card may lose data or may be destroyed if it is re-
moved or if there is a power failure.
Only insert the SD card when the device is in a de-energized state.
Avoid write operations to SD cards. Reasons:
-
The number of write cycles possible on SD cards is limited.
-
A power failure during write operations will most likely lead to loss of data.
Only remove the SD card when the device is in a de-energized state.
Before switching off, ensure that no software write operations to the SD card are
in progress.
Do not apply any force (SD cards are protected against reverse insertion).
