5 Installation
5.3 Interfaces
HMI/PLC XV-102
08/2016 MN04802004Z-EN
www.eaton.com
35
5.3.5
Ethernet
Tab. 11 Control LEDs of the Ethernet interface
Cable
Use screened twisted pair cable (STP) for networking:
For device to device connection (crossover cable)
For connecting to the hub/switch: 1:1 patch cable
Maximum cable length: 100 m.
Fig.. 14 Ethernet interface (RJ45 socket)
LED
Signal
Meaning
ACT (yellow)
flashes
Ethernet is active (data traffic)
LINK (green)
lit
Active network is connected and detected
ACT
LINK
CAUTION
Forces on the Ethernet interface
Communications may be affected, and the connection's mechanical components
may be damaged, if the Ethernet interface is subjected to strong vibrations or the
RJ45 plug-in connection is subjected to pulling.
Protect the RJ45 plug-in connection from strong vibrations.
Protect the RJ45 plug-in connection from tensile forces at the socket.