Eaton XP-503, User Manual

Page: 66 / 70

8 Technical data
8.4 General
66
XP-503
12/2014 MN048014-EN www.eaton.com
8.4 General
Component Description
Device system Built-in mounting panel PC
Built-in device
Secured with the help of holding brackets
Housings Industrial housing design built to meet EMC requirements
Display housing
(incl. Front frame)
Aluminium die-cast
Powder-spray painted surface
RAL 9006, white aluminum
Computer housing Galvanized sheet steel
Sheet thickness 1 mm
Cover glass Tempered glass across the entire surface
(tempered soda-lime glass)
Non-glare surface (chemically microetched); gloss: 85
Designer bezel with direct-to-glass printing
RAL 9005 jet black
Thickness: 3 mm (XP-503-10)
Thickness: 3 mm (XP-503-15)
Thickness: 4 mm (XP-503-21)
Keypad Projected capacitive touch panel (PCT)
Multi-touch capable, 4-point touch operation
PCT sensor laminated on the back of the glass panel
ITO-based touch sensor
Touch controller connected to computer board via USB interface
Safe PCT function by using a functional earth with as low a resistance as possible:
minimum cross-sectional area of 6 mm²
Tab. 12 Technical Data