xChargeIn
Appendix: Access protection
Manual for MID variants V1.01
24
© EATON
Configuring and diagnosing
To configure and diagnose, the two screws of the housing cover must be
loosened and the housing cover must be removed. The connection panel
cover is located underneath. After the first commissioning, the charging sta-
tion operator can secure the connection panel cover by means of a seal.
Opening the connection panel cover allows access to important interfaces
and configuration settings located in the connection panel (Ethernet, USB in-
terface, service button, ...)
The power supply of the charging station is still protected by the terminal
cover, which can be sealed.
1
... Terminal cover
2
... Connection panel
Information
None of the available configuration settings (in the connection panel or via
the web interface) has any effect on the operational readiness or the mea-
suring accuracy of the active power meter.
