Eaton XC200 Series, User Manual

Page: 62 / 82

10/10 MN05003004Z-EN
58
You have now determined the parameters for the hardware
connection between the PC and the PLC (node ID 2).
X
Call up the communications parameters in the “Online” menu
once again and select the control which you want to program/
test.
X
Enter the number 3 as the target ID in the example. The target
ID is identical to the routing ID!
To enter the target ID, click on the field in the Value column, to
the right of the term Target ID. Enter the number 3 there and
confirm with OK.
X
Log on and carry out the action.
PLC combinations for routing
The following PLC support routing:
Number of communication channels
Several communication channels can be opened, e.g. PC n PLC
2, PC n PLC 3 in dependence on the PLC (communication
channel) which is connected to the PC. The status display of
control 2 and 3 can be implemented simultaneously.
Table 14: Type and number of communication channels
Figure 82: Channel parameter setting
From P XC100
XC121 XC200
1)
EC4-200
To
O
XC100,
XC121 x x x
XC200
1)
x x x
EC4-200 x x x
1) XC200 from version V2001-03-01
Communications
channel PLC Max. channel
count
TCP/IP Level2Route XC200 5
Serial RS 232 Level2Route XC…/EC4-200 1