27
Component Based Diagnostic
Procedures
Component
Based
Di
a
g
nostic Pr
ocedur
es
Obs: 1
•
Unplug the TCM before electrical welding service in any part of the vehicle.
•
The connectors P1, J1, P1A, J1A, P1B e J1B require maximum care when plugging or unplugging them from TCM and
harness.
•
The range and deep valves bobbin have a resistance between 213 and 235 Ohms @ 20ºC
•
The breakout box warning lamp has the same behavior of the cabin warning lamp (it lights for 2 seconds when the key
is "on" position and flash when the transmission is in downshift protection).
COMPONENT
PROCEDURE
OUTPUT
ACTION
Range Switch
•
Follow Procedure 02
•
Engage high range.
•
Measure between the terminals
2 - 11 with the multimeter on
Vac position
3,0 a 4,5 Vac
•
If the output is out of specification
replace J3 the J3 from the harness.
•
If same output replace the range
switch.
•
If the output is OK, replace the trans-
mission harness.
•
Follow Procedure 02
•
Engage low range.
•
Measure between the terminals
2 - 11 with the multimeter on
Vac position
0 a 0,010 Vac
•
If the output is out of specification
replace J3 the J3 from the harness.
•
If same output replace the range
switch.
•
If the output is OK, replace the trans-
mission harness.
COMPONENT
PROCEDURE
OUTPUT
ACTION
Deep Switch
•
Follow Procedure 02
•
Engage low range.
•
Measure between the terminals
3 - 10 with the multimeter on
Vac position
3,0 a 4,5 Vac
•
If the output is out of specification
replace J4 the J7 from the harness.
•
If same output replace the deep
switch.
•
If the output is OK, replace the trans-
mission harness.
•
Follow Procedure 02
•
Engage low range.
•
Measure between the terminals
3 - 10 with the multimeter on
Vac position
0 a 0,010 Vac
•
If the output is out of specification
replace J4 the J7 from the harness.
•
If same output replace the range
switch.
•
If the output is OK, replace the trans-
mission harness.
Summary of Contents for TRTS4400
