Eaton TC 24, User Manual

Page: 9 / 54

1- 3 Keys and Displays 1- 3 Keys and Displays
KEYPAD OPERATION KEYPAD OPERATION
SCROLL KEY :
This key is used to select a parameter to be viewed or adjusted.
UP KEY :
This key is used to increase the value of selected parameter.
DOWN KEY :
This key is used to decrease the value of selected parameter.
RESET KEY :
This key is used to:
1. Revert the display to the process value or set point value
(if DISP is set with SP1).
2. Reset the latching alarm, once the alarm condition is
removed.
3. Stop the manual control mode, auto-tuning mode and calibration
mode.
4. Clear the message of auto-tuning error.
5. Restart the dwell timer when the dwell timer has been time out.
6. Enter the manual control menu when failure occurs.
ENTER KEY : Press for a minimum of 5 seconds.
Press for 5 seconds to:
1. Enter setup menu. The display shows .
2. Enter manual control mode when manual control mode
or is selected.
3. Enter auto-tuning mode when auto-tuning mode
is selected.
SCROLL KEY :
UP KEY :
DOWN KEY :
RESET KEY :
ENTER KEY :
press press
9
www.comoso.com