Installation
12
Eaton T2235 Series eATS ePDUs P-164000014—Rev 1
www.eaton.com/ePDU
!
IMPORTANT
The ePDUs have two separate receptacle groups. The ePDU segments are protected separately
by circuit breakers on the front panel.
To install the ePDU:
1.
If optional circuit breakers are installed, verify that each circuit breaker on the ePDU is in the OFF position.
The indicator LED should be off.
2.
Plug the equipment power cords into the ePDU output receptacles. Distribute the load evenly between
the segments.
3.
Secure the power cords to the cord retention bracket with the supplied tie wraps.
4.
If your model uses a detached power cable assembly, connect the power cable(s) to the rear panel of the
ePDU.
5.
Plug the ePDU power cord(s) into a power outlet. The indicator LED illuminates.
6.
If optional circuit breakers are installed, turn each circuit breaker to the ON position.
7.
This procedure is completed
.
Power Cable Cautions
The power cable assembly connects to the T2235 Series eATS ePDU on the rear panel and the other end of
the cable assembly connects to the main power supply.
Eaton offers power cable assemblies with plug configurations for most countries. Most T2235 Series eATS
ePDU models have an attached power cable and plug, but some have detached cords.
CAUTION
If the plug on the power supply cord is to be used as the disconnect device, the power outlet
should be near the equipment and should be easily accessible.
Power Source Caution
Before applying primary power to the T2235 Series eATS ePDU, verify that the power source has the correct
voltage and current for proper operation of the T2235 Series eATS ePDU model you are installing. Visit
www.eaton.com/ePDU
for technical specification data sheet information for your model.
CAUTION
Before installing T2235 Series eATS ePDU systems purchased with optional breakers, verify that
the breakers are in the OFF position.
NOTE
If power to the ePDU is interrupted, check each circuit breaker and reset if
necessary.
Summary of Contents for T2235 Series
