Eaton T2235 Series, Installation, Operation And Maintenance Manual

Page: 14 / 40

Eaton T2235 Series eATS ePDUs P-164000014—Rev 1 www.eaton.com/ePDU 9
Chapter 3 Installation
The Eaton T2235 Series Automatic Transfer Switch (eATS) Enclosure Power Distribution Unit (ePDU) models
have a 19” chassis composed of 16 gauge (Ga.), electrolytic galvanized (EG) or cold roll (CR) steel plate. The
T2235 Series eATS ePDU can be mounted on a rack or in a cabinet that accepts standard 19” width spacing.
The ePDUs are installed in a 1U orientation. Installation of a T2235 Series eATS ePDU is to be performed by
qualified, trained technicians.
This chapter explains the following:
l
Equipment inspection
l
Setup and installation
l
Front and back panel diagrams
Inspecting the Equipment
If any equipment has been damaged during shipment, keep the shipping cartons and packing materials for the
carrier or place of purchase and file a claim for shipping damage. If you discover damage after acceptance, file
a claim for concealed damage.
To file a claim for shipping damage or concealed damage: 1) File with the carrier within 15 days of receipt of the
equipment; 2) Send a copy of the damage claim within 15 days to your service representative.
Checking the Accessory Bag
The following parts for installing the T2235 Series eATS ePDU are located in the accessory bag:
l
(4) 10-32 X 1/2 Ohms Phillips head screws
l
(4) #10 finishing nickel washer
l
(4) #10 nylon washer
The following documentation is located in the shipping carton:
l
User's guide
Cable Restraint Tray
Optional equipment is not shipped with aT2235 Series eATS ePDU. Optional equipment is shipped separately.
If you ordered optional accessories, verify that the associated hardware is included when the option is
delivered.
The depth of your model determines which optional cable restraint tray you need to order for your eATS ePDU:
l
If your model is 228.6 mm or 241.3 mm (9” or 9.5”) deep, use the KIT-CABLRES-01 cable tray.
l
If your model is 177.8 mm (7.0”) deep, use the KIT-CABLRES-03 cable tray.
KIT-CABLRES-01 Universal Cable Restraint System
The following parts for installing the optional cable restraint tray are located in the KIT-CABLRES-01 shipping
carton:
l
(1) Cable management tray (001-2211-2)
l
(2) Mounting brackets (001-2212-2)
l
(11) 6-32 X 1/4” black screws (035-1606)
l
(12) Tie-wraps, 8” (010-0008)