![Eaton Smart Home Controller 2.0 Quick Installation Manual Download Page 8](http://html1.mh-extra.com/html/eaton/smart-home-controller-2-0/smart-home-controller-2-0_quick-installation-manual_4130713008.webp)
Quick Installation Manual with MRF
Page 8 of 24
B. Select Tab:
Interfaces
C. Activate needed ECIs and check their IP addresses:
D. Click:
OK
ECIs connected to the SHC are indicated by a light blue dashed line:
7. SHC settings:
A. Right click on the SHC Icon and select:
Settings
B. Select Tab:
Devices & Zones
C. Import the Project-Topology as SHC Zones and remove Zones not used.
D. Add additional Zones if needed and add the applicable Devices to each Zone (in example
below not all devices are shown):