Quick Installation Manual with MRF
Page 4 of 24
1. Introduction
1.1. Safety instructions
This document contains important warnings and safety instructions which must be observed
and followed by users. Failure to follow these warnings and safety instructions will put the fault-
free operation of the Smart Home Controller at risk.
1.2. Intended use
xComfort products are designed for use in private homes and similar, fixed electrical
installation systems. Applicable standards can be found in the CE declarations of conformity
included in the mounting instructions supplied with each product.
1.3. About this document
This manual is intended for trained Installers only and describes the quick installation and
configuration of new Smart Home Controller 2.x projects with MRF. Following this manual will
ensure a successful installation
1.3.1. How to start
The Smart Home Controller 2.x configuration is simplified and integrated in MRF 2.42 or
higher. The Smart Home Controller can be preconfigured in the MRF Project including the
SHC Zones, SHC device names and functionality. Download the latest MRF version first.
Always prepare and maintain the Smart Home Controller configuration in the MRF project.
1.3.2. Troubleshooting
In case of problems check chapter 4 Troubleshooting.
1.3.3. Feedback
Please feel free to support us with any suggestions or feedback. Please use the feedback form
in Appendix B .
