EATON
SFX Product Family Installation and Operation Manual 6045988-001 Rev. A E-ELCL-II005-E March 2019
8
Maximum Input Frequency (Dig)
Switch-on Level
Standard switch on at 3.0 V (Software Configurable)
Switch-off Level
Standard switch off at 2.0 V (Software Configurable)
Input Type
Frequency, Ch 3-4, Analog, Pull-up or Pull-down Resistor (Software Configurable)
Analog Input Resolution
9 bits
Accuracy
+/- 2% FS
Measuring Range
0...5 V
Input Type
Variable reluctance Ch 1-2 (Software configurable)
Maximum Input Frequency (FREQ) (0-5 V square or sine wave)
0Hz...25kHz* Note: maximum aggregate is 200 kHz,
Note: phase and duty cycle are not supported by these inputs
minimum detectable pulse duration is 20 μsec
Switch-on Level
Selectable as 2.2 V or self adaptive (input device changes voltage with frequency)
Switch-off Level
Selectable as 0.0 V or 1.0 V
Input Type
Variable Reluctance, Ch 1-2, Analog (Software Configurable)
Analog Input Resolution
9 bits
Accuracy
+/- 15% FS
Measuring Range
0...5 V
Output Type
High Side
Max Amperage
2A
Diagnostics
Open/Short circuit protection
Output Type
Low/High side, H-Bridge (Software configurable)
Max Amperage
4A
Diagnostics
Open/Short circuit protection
Output Type
PWM, High side
Max Amperage
2A
Diagnostics
Open/Short Circuit Protection
PWM Frequency
50 – 2 kHz
Dither Frequency
Configurable
Dither Amplitude
Configurable
Control Range
0.05 - 2 A
Control Resolution
1 mA
Fly Back Protection
Integrated
Duty Cycle Resolution
.01% @ 250 Hz
Output Type
PWM, High Side (Software configurable)
Max Amperage
4A
Diagnostics
Open/Short circuit protection
PWM Frequency
50 – 500 Hz
Dither Frequency
Configurable
Dither Amplitude
Configurable
Control Range
0.05 - 4 A
Control Resolution
1.5 mA
Fly Back Protection
Integrated
Duty Cycle Resolution
.01% @ 250H
Suggested Connector Manufacturer
Deutsch Inc.
Model DRC23-40PA
Contact Surface
Nickel plated
A Connector Assembly Parts List
Mating connector DRC26-40SA, size 20 solid contacts P/N 0462-201-20141
intended for 20AWG wire, 0462-005-20141 intended for 16-18 AWG wire, size 20 stamped and
formed contacts P/N 1062-20-0122 (nickel plated), sealing plug P/N 0413-204-2005
A Connector Tooling Manufacturer
Deutsch
A Connector Hand Tool Part Number
Solid contacts: Service crimper: HST-1561 Production crimper(ratcheting): HDT-48-00
Stamped contacts: DTT-20-00
A Connector Contact Removal Tool
P/N 0411-240-2005
P Connector Assembly Parts List
Mating connector DT06-6S-EP06, size 16 solid contacts P/N 0462-201-16141
intended for 16-20AWG wire, size 16 stamped and formed contacts P/N 1062-16-0122(nickel plated),
wedge W6S-P012, sealing plug P/N 0413-217-1605
P Connector Tooling Manufacturer
Deutsch
P Connector Hand Tool Part Number
Solid contacts: Service crimper: HST-1561 Production crimper(ratcheting): HDT-48-00
Stamped contacts: DTT-16-00
SFX Product Family
