Eaton - Lighting Systems iLight Product Series - RI-2 73-897-00 IM8791 Iss 5 3
Introduction
RI-2 provides a versatile interface between
an iLight system and other control systems.
This compact unit can be mounted virtually
anywhere. It has eight inputs, which may be
programmed to be either digital or analogue.
The unit also has eight volt-free mains rated
low power relays. These allow a wide range of
external equipment to be controlled. All inputs
and outputs are fully programmable as to their
function.
This interface allows the iLight iCANnet
TM
network to control other systems and other
systems to communicate with the iCANnet
TM
network. RI-2 may be programmed to control
curtains & blinds, screens, AV and other
presentation equipment as well as controlling
contactors for heavier power applications. With
the control inputs set to analogue, any 0-10V
source can be programmed to control system
functions. The unit could also be programmed
such that system sequences could be activated
by a motion detector or other devices on
the iCANnet
TM
network. The adaptability and
versatility of this product make it an essential
item in larger, more sophisticated venues where
more than just lighting control is required.
Weight:
Packed: 2.6 kg
Unpacked: 2.4 kg
Specification
Electrical
Supply: 230 volts -/+ 10% 50/60 Hz 1 Amp
(optionally, 127 volt 60 Hz)
Protection: Requires external circuit breaker
Internal Electronics fuse only
Load Types:
8 x Volt free relays – changeover contacts rated
23/-10% 50/60Hz 3A resistive maxC
Terminal Sizes:
iCANnetTM cable size: 5 x 1.5mm
2
Control input cable size: 10 x 1.5mm
2
Switch output cable size: 9 x 1.5mm
2
Audio Visual Port cable size: 2 x 1.5mm
2
Relay output cable size: 24 x 1.5mm
2
Memory:
FLASH memory to be able to upgrade software
EEPROM for program and sequence memory
Environmental Data
Temperature: 2
0
C to 40
0
C
Humidity: +5 to 95% non-condensing
Dimensions
