Eaton PXS24 Series, Technical Manual

Page: 4 / 14

Eaton Industries (Austria) GmbH, Eugenia 1, A-3943 Schrems MA-PXS24_Economy.docx/02.2018
www.eaton.eu/documentation 4 150501508/IL019189ZU
THE “PXS24E…
ECONOMY“
SERIES
This manual describes the following models:
PXS24E-e2/F Economy (no
communication port)
2A
fix
with input
terminals
PXS24E02A002
PXS24E-e4/F Economy (no
communication port)
4A
fix
with input
terminals
PXS24E04A002
PXS24E-e6/F Economy (no
communication port) 6A
fix with input
terminals PXS24E06A002
PXS24E-e8/F Economy (no
communication port) 8A
fix with input
terminals PXS24E08A002
PXS24E-e10/F Economy (no
communication port) 10A
fix with input
terminals PXS24E10A002
PXS24E-e2/F-IT Economy (no
communication port)
2A
fix
without input
terminals
PXS24E02A001
PXS24E-e4/F-IT Economy (no
communication port) 4A
fix without input
terminals PXS24E04A001
PXS24E-e6/F-IT Economy (no
communication port) 6A
fix without input
terminals PXS24E06A001
PXS24E-e8/F-IT Economy (no
communication port) 8A
fix without input
terminals PXS24E08A001
PXS24E-e10/F-
IT
Economy (no
communication port)
10A
fix
without input
terminals
PXS24E10A001
INPUT
TERMINALS
Articles marked “IT” (= “input terminal”) can be used individually (> see section on “stand-alone
operation”) or in combination with other articles. Should you wish to combine several components
(including for mixed operation), please consult the PXS24 system manual.
STAND-ALONE
OPERATION
An individual PXS24E-…/IT element can be used for the protection of a channel. This requires the
selection of a model with input terminals (“IT”), as models without input terminals are supplied via the
busbar only.
TEMPERATURE
RISE
To ensure thermal protection, modules with high amperage should not be placed directly next to one
another, wherever possible. Please also refer to the technical data of the individual components.
De-rating: If three or more 16A modules are placed directly next to each other (in the specified
temperature range), these must be de-rated to 13A. For this type of application, we therefore
recommend using 13A modules instead. If 16A modules are to be used, please leave 1HP (18mm)
between each of the modules for cooling purposes.
TECHNICAL DATA
Marking CE
Certification UL508 + UL2367 (section 10 and 12)
Product standard Applicable sequences of:
EN60947-1, EN60947-5-1, EN61009-1,
EN61131-2 and EN61000-4-2
Details acc. to Werksnorm WN 1008