Eaton POWERWARE Plus 18, Manual

Page: 78 / 311

System Operation
Plus 18
NOTE
Using the DOWN arrow key to scroll through all the menu
The present sem’ngs are indicated with an asterisk.
8.
9 .
10.
11.
To view the possible for Voltage option, use the RIGHT
and LEFT keys. Once the desired setting is reached, the
DOWN arrow key to get to the Output Frequency option. Use the
RIGHT and arrow keys to view the the key at
the setting.
Press DOWN arrow key to display the rating.
This display is view only, the rating can not change from this selection.
To return to normal press the MENU key four times then press
to get back to the UPS
S Y S T E M S T A R T - U P
2 . Close the Input, Output, and the Battery
3 .
Wait for the power-on to (approximately one minute)
4 .
Press button, hold for and release. approximately 30
light illuminate.
4.6 SYSTEM SHUT-DOWN BYPASS)
1. Hold the UPS OFF HORN sounds for 3 seconds. NORMAL will go
off and power be removed the
4.7 SYSTEM SHUT-DOWN (WITH
1. Hold the UPS OFF button the unit transfers to Bypass, the BYPASS light
manually opens the output breaker.
4.8 MAZNTENANCE BYPASS
While in the load is powered the utility AC power.
The make-before-break switch any load interruptions while in
Bypass. This allows for
UPS. The Manual Bypass switch is located in
ON positiou.
1. Transfer to Bypass (hold the button for 3
4 - 4 0
ELECTRONICS CONFIDENTIAL