Eaton Powerware 9390 IAC-D, Installation And Operation Manual

Page: 11 / 84

Introduction
1-5
EATON Powerware
®
9390 IAC-D Installation and Operation Manual
S
164201591 Rev B powerware.com
1.4 Safety Warnings
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during installation and
maintenance of the IAC-D. Please read all instructions before operating the equipment and
save this manual for future reference.
The IAC-D is designed for industrial or computer room applications, and contains safety shields
behind the doors. However, the
UPS system
is a sophisticated power system and should be
handled with appropriate care.
D A N G E R
This UPS system contains LETHAL VOLTAGES . All repairs and service should be performed by
AUTHORIZED SERVICE PERSONNEL ONLY . There are NO USER SERVICEABLE PARTS inside
the UPS.
W A R N I N G
쑺
The UPS system contains its own energy source (batteries). The output terminals may carry
live voltage even when the UPS is disconnected from an AC source.
쑺
To reduce the risk of fire or electric shock, install this IAC-D in a temperature and humidity
controlled, indoor environment, free of conductive contaminants. Ambient temperature
must not exceed 40
°
C (104
°
F). Do not operate near water or excessive humidity (95% max).
The system is not intended for outdoor use.
쑺
Ensure all power is disconnected before performing installation or service.
C A U T I O N
쑺
Never dispose of batteries in a fire. Batteries may explode when exposed to flame.
쑺
Keep the IAC-D doors closed to ensure proper cooling airflow and to protect personnel
from dangerous voltages inside the unit.
쑺
Do not operate the UPS system close to gas or electric heat sources.
쑺
The operating environment should be maintained within the parameters stated in this
manual.
쑺
Keep surroundings uncluttered, clean, and free from excess moisture.
쑺
Observe all DANGER, CAUTION, and WARNING notices affixed to the inside and outside of
the equipment.