Communication
Eaton 9355 UPS (20/30kVA) Installation and Operation Manual 164201626—Rev F
www.eaton.com/powerquality
55
l
ConnectUPS
™
-X Web/SNMP Card - has SNMP and HTTP capabilities as well as monitoring through a Web
browser interface; connects to a twisted-pair Ethernet (10/100BaseT) network. It has a built-in switching hub
that allows three additional network devices to be connected to the network without the requirement of
additional network drops. In addition, a Environmental Monitoring Probe can be attached to obtain humidity,
temperature, smoke alarm, and security information.
l
Relay Interface Card - has isolated dry contact (Form-C) relay outputs for UPS status: Utility failure, Low
battery, UPS alarm/OK, or On bypass.
l
Modbus
®
Card - allows you to continuously and reliably monitor the UPSs in your Building Management
System (BMS).
l
Industrial Relay Card - is used to indicate the operating status of the UPS using the customer's monitoring
equipment and to connect an optional RMP. The IRC uses four isolated normally-open or normally-closed dry
relay contacts to indicate the UPS status. Normal, Bypass, Battery, and Alarm mode can be monitored (see
page 59 for more information).
l
Multi-Server Card - has six serial communication ports that can communicate simultaneously with other
computers using LanSafe Power Management Software (provided on the Software Suite CD).
l
Modem Card - provides out-of-band remote notification and monitoring using modem communication
directly to cell phones and pagers.
l
Single-Port Card - provides serial communication.
l
ConnectUPS-MX SNMP Card - has Ethernet, modem, and SNMP capabilities.
l
USB Card - connects to a USB port on your computer.
Note:
The Eaton 9355 UPS does not detect plug-and-play hardware. Before installing the USB Card, set the
UPS baud rate to 1200 through the front panel (see Table 7 on page 70).
See Figure 36 on page 51 for the location of the two X-Slot communication bays.
Figure 41. Optional X-Slot Cards
Multi-
S
erver Card
Modem Card
S
ingle-Port Card
d
r
a
C
P
M
N
S
X
M
-
S
P
U
t
c
e
n
n
o
C
U
S
B Card
Relay Interface Card
Modbus Card
ConnectUP
S
-X
W
eb/
S
NMP Card
d
r
a
C
y
a
l
e
R
l
a
i
r
t
s
u
d
n
I
Power Xpert
®
Gateway Card
Summary of Contents for Powerware 9355
