Powerware 9125 (2500–3000 VA) Seismic Kit
9
Powerware
®
9125 (2500–3000 VA) Seismic Kit Installation Instructions
S
Rev A
www.powerware.com
7.
Install the remaining cabinets, leaving any empty slots to the
outside position(s).
If there is an empty slot, install spacers to complete the seismic
kit. Attach the spacer to the front and back straps using the
supplied M4
´
8 Phillips hex-head screws.
Figure 10. Installing Spacers
8.
Roll the loaded cabinet to its permanent location.
If you installed seismic base angles, secure the base to the floor
with earthquake bolts (not provided).
Figure 11. Floor Mounting
