Powerware 9125 (2500–3000 VA) Seismic Kit
6
Powerware
®
9125 (2500–3000 VA) Seismic Kit Installation Instructions
S
Rev A
www.powerware.com
2.
Attach the front and back straps to the base using the supplied
M6
´
16 hex bolts and lockwashers (see Figure 4). Verify the
straps align with the front and back edges of the base.
NOTE
For floor mounting, also attach the seismic base angles with the
front and back straps as shown in Figure 5.
NOTE
The base casters are removeable. To mount the seismic kit flush
with the floor, remove the casters and secure the base angles using the
inside screw position.
Figure 4. Attaching the Straps
Figure 5. Seismic Base Angles for Floor Mounting
