IOM 900 & 950B 06/2011
REV A.
Page 4 of 4
Installation, Operation & Maintenance Manual
Model 900 & 950B Duplex Basket Strainer
SHUT
DOWN
PROCEDURE
(TAKING
THE
STRAINER
OUT
OF
SERVICE)
1.
Slowly close the pipeline valves upstream and
downstream from the strainer. Make sure these
valves are tightly closed. Open all valves between
the two strainer housings.
CAUTION:
To protect the operator when
draining and venting, the fluid must be
piped to a safe area. This is a requirement
for all fluids and for water with a
temperature above 120˚F. The operator should wear
appropriate protective equipment (goggles, gloves, vest,
clothing etc.) consistent with the process fluid for strainer
operation and servicing.
2.
To relieve fluid pressure, first open the drains at the
bottom of each strainer housing and then open any vents,
if provided.
3.
Proceed to clean and inspect the strainer. Inspect the
strainer to insure there is no standing fluid.
RECOMMENDED
SPARE
PARTS
1- Eaton Replacement Basket
1- Eaton Replacement Gasket
When ordering spare parts, be sure to specify all nameplate
data as well as description and quantity of parts.
Always use genuine Eaton replacement parts for guaranteed
fit and performance.
Visit our web site,
www.EatonFiltrationSales.com,
for information
about
the different types of Eaton Duplex Basket Strainers.
Eaton
North America — HQ
70 Wood Avenue, South
2nd Floor
Iselin, NJ 08830
Toll Free: (800) 656-3344
(North America only)
Voice: (732) 767-4200
Fax: ( 952) 906-3706
Eaton
Brazil
Av. Julia Gaioli, 474 –
Bonsucesso
07251-500 – Guarulhos
Brazil
Voice: +55 (11) 2465-8822
Fax: +55 (11) 2465-8884
Eaton
Singapore
4 Loyang Lane #04-01/02
Singapore 508914
Voice: +65-6825-1668
Fax: +65-6825-1639
Eaton
Europe/Africa/Middle East
Auf der Heide 2
53947 Nettersheim
Germany
Voice: +49-2486-809-0
Fax: +49-2486-809-800
Eaton
China
No.3, Lane 280, Linhong Road
Changning District, 200335
Shanghai, P.R. China
Voice: +86-21-5200-0099
Fax: +86-21-5200-0400
WARRANTY
All products manufactured by Seller are warranted against defects in material and
workmanship under normal use and service for which such products were designed for a period
of eighteen (18) months after shipment from our factory or twelve (12) months after start-up,
whichever comes first. OUR SOLE OBLIGATION UNDER THIS WARRANTY IS TO REPAIR OR
REPLACE, AT OUR OPTION, ANY PRODUCT OR ANY PART OR PARTS THEREOF FOUND TO BE
DEFECTIVE. SELLER MAKES NO OTHER REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. WE SHALL NOT BE LIABLE FOR CARTAGE, LABOR,
CONSEQUENTIAL DAMAGES OR CONTINGENT LIABILITIES. OUR MAXIMUM LIABILITY SHALL NOT
IN ANY EVENT EXCEED THE CONTRACT PRICE FOR THE PRODUCT.
mdi - Manufacturers Distributor, Inc Phone: (727) 835 - 0665 | Fax: (813) 571 – 0422 Strainers.mdiSales.com | [email protected]
