4 Commissioning
4.5 Acyclic data
DX-NET-SWD...
08/14 MN04012009Z-EN
www.eaton.com
49
4.5.3 List of parameters
Table 15 below lists all the parameters that must be processed acyclically via
SmartWire-DT.
The abbreviations and acronyms used in the overview are defined below:
The "Parameter number in specific device" column is subdivided into three
sub-columns, one for each PowerXL device (DA1, DC1, DE1).
•
When there is a parameter number in the sub-column for a device, this
means that the parameter is available on that device. The parameter will
have the exact same function on all device types.
•
A checkmark (
✓
)
means that the corresponding parameter is available
on the device but has no parameter number.
•
A minus sign ( – ) means that the parameter is not available on the
device.
Abbreviation
Meaning
PNU
Parameter number; parameter designation used by the drivesConnect parameter software and
the external DX-KEY-LED keypad's display.
PNU Subindex
Parameter number subindex
RUN
Access rights to the parameters during operation (RUN)
STOP
The parameter can only be accessed in STOP mode
ro/rw
Parameter read and write permissions:
ro = read only
rw = read and write
Name
Short parameter name
Value
• Setting value of the parameter
• value range
• Display value
DS
Default setting (the parameter's value when using the device's factory settings)
The values in parentheses are the default settings when using a frequency of 60 Hz.
￫
For more detailed information on the individual parameters,
please refer to the manuals for the corresponding basic devices:
•
DA1 variable frequency drive: MN04020005Z-EN
•
DC1 variable frequency drive: MN04020003Z-EN
•
DE1 variable speed starter: MN040011EN
