![background image](http://html1.mh-extra.com/html/eaton/p1-32-igf1-svd-sw-hi11-atex22/p1-32-igf1-svd-sw-hi11-atex22_operating-instructions-manual_4188965013.webp)
03/11 IL01203009Z
Designated Use
3
Safety switch
When operating the device:
X
Ensure the operating instructions are made available on location at all times.
X
Observe safety instructions.
X
Observe national safety and accident prevention regulations.
X
Only run the device according to its performance data.
X
Servicing/maintenance work or repairs which are not described in the operating
instructions must not be performed without prior agreement with the manufacturer.
X
Any damage may render explosion protection null and void.
X
No changes to the device impairing their explosion protection are permitted.
X
Install and use the device only if it is undamaged, dry and clean.
1.3 Warnings
Warnings are sub-divided in these operating instructions according to the following
scheme:
They are always identified by the signalling word “WARNING“ and sometimes also have
a symbol which is specific to the danger involved.
1.4 Conformity to Standards
The safety switches comply with the following standards and directives:
X
Directive 94/9/EC
X
IEC/EN 61241-0, IEC/EN 61241-1, IEC/EN 61241-14
X
IEC/EN 60947-1, IEC/EN 60947-3
2
Designated Use
Safety switches ensure that machines in areas subject to explosion hazard are
disconnected from electrical power during cleaning and repair work.
The safety switches are approved for use in hazardous areas Zone 22.
WARNING
Type and source of the danger!
Z
Possible consequences.
X
Measures to avoid danger.
WARNING
Only use the device for its intended purpose!
Z
Otherwise, the manufacturer’s liability and warranty expire.
X
The device may only be used under the operating conditions described in these
operating instructions.
X
The device may only be used in hazardous areas according to these operating
instructions.
Summary of Contents for P1-32/IGF1/SVD-SW/HI11/ATEX22
