EATON
Installation & Maintenance Instructions
IMI+70-XP-XT Iss_A
© 2020, Eaton
Page 10
3.3
Accessory Installation
3.3.1
Sunshield Installation
Depending on the model required, sunshields are sometimes supplied uninstalled to prevent
damage during shipping and unpacking. There is a protective plastic film that must be removed
prior to installation.
The correct sunshield fixings, for each model, are supplied with the camera system and should be
positioned as detailed below.
To mount the sunshields, first they must be positioned correctly and fixed with a Nylon spacer
between the sunshield and the camera housing, the M5-A4 Button head screws supplied must have
the red fiber washer fitted before fixing the sunshield. (Fig.10)
Sunshields have two corner and two ‘tab’ fixing types, one for the front of the housing and shorter
screws at the rear. (Fig.10)
Fig.10 Sunshield Installation
