Menvier300
Installation
Page 21
Figure 36 FSL Zone Wiring
– Control Unit
Figure 37 shows the wiring connections for FSL
zones on the EXP-W10 expander. Note that the
connections are different on the expander
compared with the control unit.
Figure 37 FSL Zone Wiring
– EXP-W10
The allowed values for Alarm Contact/End of Line
are: 4k7/2k2. 1k0/1k0, 2k2/2k2, or 4k7/4k7.
Note: Use the same pair of values for ALL FSL
wired circuits on the control unit. Each wired
expander can use a different pair of resistor
values, but ALL circuits on an expander must
have the SAME values.
Figure 38 shows The wiring connections for FSL
zones on the EXP-WCC.
Figure 38 FSL Zone Wiring
– EXP-WCC
The allowed values for Alarm Contact/End of Line
are the same as for the EXP-W10.
Figure 39shows the wiring connections for FSL
zones on a KEY-KPZ01. Note that the resistance
values shows are examples.
Figure 39 Wiring FSL Zones on KEY-KPZ01
When programming select the FSL resistor values
for the control unit in
Installer Menu - System Options
- Wired Zone Type
. To select the resistor values for
a wired expander use
Installer Menu – Detectors
Devices – Wired Expanders - Edit Expander
.
If you wish to connect two or more detectors to a
FSL zone, Figure 40 shows the connections
required.
Figure 40 Wiring Two Detectors per Zone FSL.
Figure 41 shows an example of wiring double
doors with two door contacts to one FSL zone.
Each door contact is a reed switch, connected
Zone 0
Zone 1
2K2 EOL
4K7
Alarm contacts
Tamper contacts
2K2 EOL
4K7
Alarm contacts
Tamper contacts
100 Ohms
Zone 0
Zone 1
2K2 EOL
Wired Expander
4K7
Alarm contacts
Tamper contacts
2K2 EOL
4K7
Alarm contacts
Tamper contacts
100 Ohms
Z0
Z1
Z2
Z3
Z4
Zone 0
Zone 1
2K2 EOL
Wired Expander
4K7
Alarm contacts
Tamper contacts
2K2 EOL
4K7
Alarm contacts
Tamper contacts
100 Ohms
KEY-KPZ01
Zone 0
Zone 1
2K2 EOL
4K7
Alarm contacts
Tamper contacts
2K2 EOL
4K7
Alarm contacts
Tamper contacts
100 Ohms
